IPR is the one kind of under the HPOP right. I have all the sensors off of my old motor, just need to know which one to take off.
Truck dies after 30 minutes of running
Truck dies after running for 30 minutes(or less) and starts back after sitting for about an hour.
1. I have put 2 cps, on it and am at a loss.
2. The oil level is fine and has 1100 miles on it.
3. The fuel bowl heater fuse is good.
4. Batteries are good turns over like crazy(and starts right up after an hour)
5. Fuel is flowing (no way to check pressure) like I say starts like new after sitting.
This is a 22k mile motor(out of an 02) that I put into the truck last month. I have heard the ICP could cause this and was checking here first before I start disassembling the truck. Any other ideas just shoot.
1. I have put 2 cps, on it and am at a loss.
2. The oil level is fine and has 1100 miles on it.
3. The fuel bowl heater fuse is good.
4. Batteries are good turns over like crazy(and starts right up after an hour)
5. Fuel is flowing (no way to check pressure) like I say starts like new after sitting.
This is a 22k mile motor(out of an 02) that I put into the truck last month. I have heard the ICP could cause this and was checking here first before I start disassembling the truck. Any other ideas just shoot.
1 - 3 of 4 Posts
I changed the electrical part (solenoid I guess) on the IPR and it is fixed, no bad o rings, just bad luck.
Thanks
Thanks
1 - 3 of 4 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
The Diesel Stop
A forum community dedicated to all Ford Diesel owners and enthusiasts. Come join the discussion about PowerStrokes, performance, modifications, troubleshooting, towing capacity, maintenance, and more!
Full Forum Listing
Top Contributors this Month
View All
John in OkieLand
62 Replies
bugman
57 Replies
Big Horn
45 Replies
