The Diesel Stop banner

Truck dies after CPS and UVCH swap?

1334 Views 12 Replies 5 Participants Last post by  skylinedan
I started getting a 0676 code a few months ago which from what I've read is a glow plug code. Soon after that the truck died a few times and started right back up, so without scanning it I just replaced the CPS judging from similar accounts on this site. Shortly after that the truck started running rough like it's missing, after having it scanned I replaced both UVC harnesses, both gaskets, and all of the glowplugs. The truck then ran fine but the 0676 code continued. That was all about a month ago. Then last week the truck died 3 times in 2 days. The truck started back up just fine after it died like nothing happened. Everytime the truck died it was waiting in traffic not moving. What else can I check to track this down, and why would I still be throwing a 0676 code after replacing all that I did and clearing the PCM? Thanks for any help guys.
1 - 1 of 13 Posts
Mine went out last week, I had the dealer send me one right out, changed it after work and no more dieing. $13.64, I work at a body shop so we get a brake on parts. I've heard people spend upwards of a $150 for one , thats just wrong! I'm glad someone got smart and changed things.

1 - 1 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.