The Diesel Stop banner
1 - 3 of 3 Posts

· Registered
Joined
·
8 Posts
Discussion Starter · #1 ·
My buddy has a 92 F350 with a 2002 SD 7.3/4r100 swapped into it, thing runs awsome, it blew a HPOP oring and covered everything with oil so he replaced the o-ring replaced the oil and pressure washed the motor. Ever since then the truck when you get on it will die randomly, and shoot white smoke out, you can restart the truck pretty easily and if your nice to it (very little throttle) you can get it home, I've replaced the CPS (just for practice) and unplugged the ICP which gave me trouble on my 95 once upon a time and it doesnt seem to make any difference, it did it earlier today and shut off 3 times in about 100 yards then ran fine the rest of the day, there is no CEL or other idiot lights on in the truck. It has an Edge juice with Attitude and an EZ (yea I know....) any help would be greatly appreciated...
 

· Premium Member
Joined
·
8,120 Posts
Check the wiring to the ICP (water in the connector) maybe ,or the wiring connections to the Injector circuits on the valve covers
 

· Registered
Joined
·
3,401 Posts
Unplug everything and blow dry all connections. Follow with a healthy dose of contact cleaner.

Lose the pressure washer for engine cleaning. Rags and Brake Clean. Do not soak it down.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top