[Blue74]

I was wiring up some back up lights on the rear of my 2013 F-350 Dually and saw these two plugs and was wondering what they are for. They are attached to the side of the trailer hitch. Ideas?

 

[NickKent]

I have them too on my 2016. I have to drill new mounting holes for them in my upgraded trailer hitch so they aren't just hanging there. I was also wondering what they are. Maybe trailer plugs for the 5th wheel/gooseneck trailer plug in the bed?

 

[Sportscraft]

Do you have the backup sensors or Camera? If not maybe those are the connections for them. There plug and play somewhere under there.

 

[NickKent]

I have both and still have those plugs. 6.2 though

 

[HeavyAssault]

Those are for the OEM goose-neck trailer electrical connector that mounts to the driver's side on the inside of the bed.

 

[2015_PSD]

Those are for the OEM goose-neck trailer electrical connector that mounts to the driver's side on the inside of the bed.

Yep; I just bought the harness for mine.

 

[Blue74]

Great I am having the B&W turn over ball and 5th wheel hitch installed and the wiring into the bed on the 28th. :smile2:

 

[Scottb NY]

I was wondering if anyone has the part number for this harness? I have searched all over for it and can not find it anywhere. I want to use that circuit to power some auxiliary back up LED's that are just over the limit for the regular backup light circuit.

 

[2015_PSD]

I was wondering if anyone has the part number for this harness? I have searched all over for it and can not find it anywhere. I want to use that circuit to power some auxiliary back up LED's that are just over the limit for the regular backup light circuit.

Sure thing - 4
BC3Z 13A576 A (WIRING ASY). Mine was $79.54.

Sent from my SAMSUNG-SM-G920A using Tapatalk

 

[Blue74]

Help. I finally ordered the loom and installed it, having lengthened the wires so it would reach to the front of the bed. I am getting nothing at the plug, power, lights or ground. The other two are working, the one on the bumper and the one that was installed in the rear of the bed. Are there any relays or fuses that I need to install to get the two plugs working that are on the bumper/frame by the spare tire?

 

[Blue74]

Never mind I had taken the socket apart to route the wires and did not get it fully seated when I put it back together. Working now.